You’re on the list. We’ll email you 48 hours before we open, with 10% off your first order.
Not sent — that did not go through. Check the address and try again, or send us a message and we’ll add you by hand.
Guides
How to set the thing up, what to buy, and what nobody tells you until you have already got it wrong once. Written from doing it, not from a keyword list.
All of it written for British garages — single-skin brick, breeze block that will not take a plug, an up-and-over door eating the ceiling, and a slab that was never sealed. 74 guides, in 9 groups.
No guides match . Try a shorter word, or clear the search to see all 74.
Start here
The two that cover the most ground: the wall, and the bench in front of it.
How to organise a garage wall
A practical guide to organising a garage wall: zoning, choosing between hooks, pegboard and magnetic rails, the right fixings for masonry, and sensible mounting heights.
How to set up a workshop bench and tool wall
Setting up a workshop bench: working out the height, choosing a top, where the vice goes, and laying out the wall behind it so the bench stays clear.
Garage problems
Damp, condensation, cold, dust and the rest of what a British garage does to the things you keep in it.
Damp garage solutions: find the cause before you buy anything
Up through the slab, in through walls or roof, or out of the air: three causes that look alike and need different fixes. Find yours before buying anything.
How to stop condensation in a garage
Tools rust and the door drips because moist air is meeting cold steel. Cut the moisture, warm the surfaces, move the air, and only then buy a dehumidifier.
How to insulate a single-skin garage
Roof and door before the walls, insulation on a frame stood off the masonry, vapour barrier on the warm side, and never over damp brick. The order that works.
Show all 10 guidesShow fewer
How to heat a cold garage, and why the heater comes last
A single-skin garage loses heat as fast as any heater makes it. Seal the door, insulate the roof, get off the slab, then heat the person, not the room.
Garage dust control: where it comes from and how to keep on top of it
Much of the dust is the slab itself wearing away, topped up by what blows under the door. Seal or cover it, seal the door edges, and vacuum, never sweep.
Garage security: what actually works
One centre lock on an up-and-over door is the usual way in. Internal bolts or a defender, a deadlock on the side door, a barred window and a bike anchor inside.
Garage with no power: your options, from extension lead to proper supply
Extension lead, cordless kit, solar and a battery for lights, or a proper supply. Only the last is a real fix, and it is notifiable work, not a DIY job.
Mice in the garage: how to get them out and keep them out
They come in under the up-and-over door and round pipes you have not looked at. Seal the gaps, get seed and pet food into sealed tubs, and trap what is inside.
Garage roof leak: what to check before you call anyone
Flashing at the house wall, a blocked gutter, a slipped sheet, perished felt or a rusted fixing. Check from inside on a wet day, then rule out condensation.
How to stop tools rusting in a garage
Orange bloom on the spanners every spring is condensation plus time. Where tools should live, what to wipe them with, what goes in the drawer, what not to buy.
Walls and fixings
What your wall is actually made of, and what will hold in it. Breeze block, dot-and-dab, concrete, studs, and what to do when you cannot drill at all.
What fixings do I need for a garage wall?
Brick, aerated block, dot-and-dab, stud or precast panel: each wants a different fixing, and job one is telling them apart. Match the wall, not the hook.
How to fix into breeze block
Standard plugs crumble aerated block and pull out under load. Drill without hammer action, use a fixing made for lightweight block, and batten anything heavy.
Fixing into dot-and-dab plasterboard
A plug that grips the board is holding plaster, not wall. How to spot dot-and-dab, and the long fixings and batten route that anchor in the masonry behind.
Show all 10 guidesShow fewer
How to find a stud in a garage wall
Tap for the dull spot, look for screw dimples in raking light, sweep a magnet, or use a detector, then confirm with a pilot hole. Why detectors misread garages.
Drilling into a concrete garage wall
Hammer drill for a few holes in block, SDS for poured concrete or many. Size from the fixing packet, slightly deeper, clear the dust, stop if you hit steel.
The timber batten method for a garage wall
One length of timber on a row of fixings, and everything hangs from that. It solves aerated block, dot-and-dab and studs at once; later changes are a woodscrew.
Weight ratings explained: what garage storage can really hold
A rating describes the product alone under a still, even load. It says nothing about your wall or fixings, which are nearly always the real limit.
Mounting heavy items on a garage wall
The wall is the limit, not the rack. Use every fixing hole, put the best fixings at the top where the pull is, and batten a weak wall or go freestanding.
Garage storage when you can't drill the walls
Rented, leasehold or precast concrete: put the weight on the floor. Freestanding shelving does all a wall rack would, and adhesive holds almost nothing.
Fixing into a concrete sectional garage: what actually holds
Thin, reinforced and quick to spall: a sectional garage panel punishes ordinary plugs. Through-bolt, frame post, batten or freestanding unit: which, and when.
Storage and organisation
Getting tools, parts and seasonal kit off the floor and into somewhere you will actually put them back.
How to organise garage tools so they stay organised
Sort by how you find a tool, not what it is. Daily tools on the wall, things that roll in drawers, bulk on shelves. Test each home by putting the tool back.
Small parts storage for a garage: bins, drawers and what goes in which
Sort by quantity, not type: hundreds go in a tilt bin, a dozen in a clear divided drawer, the unnameable in one box. Steel fixings stay off a damp floor.
How to organise power tools in a garage
Each cordless tool by its handle on a steel rack into masonry, charger and batteries on a shelf beneath, socket in reach. Pegboard cannot hold a drill.
Show all 8 guidesShow fewer
How to organise spanners and sockets
One system, size order, so a gap shows what is missing. Spanners on a rack read by eye, sockets on rails by drive size then socket size, ratchets alongside.
Labelling a garage storage system without over-labelling it
Label by category, not contents: what you would look for, not what is in the box. Opaque bins and anything above eye level get one; clear drawers do not.
What to store in a garage, and what not to
Tools, bikes, tyres and sealed hardware are fine. Paint, adhesives, batteries, paper and wine are not. Fuel and gas cylinders: check the law and your insurance.
Seasonal storage in a garage: what comes in and out, and where it goes
Out of season goes up high or along the back wall, in season comes forward to eye level, swapped in spring and autumn. Nothing seasonal where you walk daily.
How to plan a garage shelving layout
Heavy low, light high, weekly at eye level, seasonal overhead, and no shelf deep enough to hide a second row. Set heights from the tallest thing going on them.
Choosing between options
Straight comparisons with a real loser on each side, including the option we sell.
Pegboard vs slatwall vs gridwall for a garage wall
Pegboard to start cheap and change often, gridwall for strength on a budget, slatwall for looks if the wall is dry. Why hardboard pegboard cannot take a drill.
Pegboard or French cleat for a garage tool wall
Cleat wins on strength and cost if you have a saw, a Saturday and a sheet of ply. Pegboard wins if you want it up in an hour and rearranged in seconds.
Boltless shelving vs welded shelving for a garage
Boltless for most garages: flat-packed, through a side door, up alone with a mallet. Welded if racking worries you and it fits through the door whole.
Show all 9 guidesShow fewer
Wall-mounted vs freestanding garage storage
Freestanding wins when you cannot drill or the load is heavy; wall wins on floor space, the thing a single garage has least of. Most garages end up with both.
Steel vs plastic parts bins for a garage
Plastic for the wall: cheaper, lighter, never rusts, clips off a panel one-handed. Steel for the bench and floor, where bins get dropped, kicked and frozen.
Open shelving vs cabinets in a garage
Open shelving for the workshop: cheaper per shelf, shows everything, dries out after winter. A cabinet only for what must be locked; cold steel sweats inside.
Garage floor tiles vs epoxy vs paint: which is right for your slab
Epoxy and paint only on a dry, sound, prepared slab, and they are permanent. Tiles float over a patched or slightly damp floor and swap one at a time.
Overhead storage vs wall storage in a UK garage
An up-and-over door swings in and takes the first metres of ceiling, so a rack rarely clears a parked car. Overhead only works with a roller door and joists.
Drawer cabinet vs parts bins for small fixings
Bins for anything bought by the hundred, drawers for the tiny and confusable: grub screws, o-rings, terminals. Most benches want both, and here is the split.
Floors
Tiles, slabs, damp, drainage and the cold coming up through the concrete.
Garage floor tiles in the UK: what they fix, what they hide and how many you need
Rigid plastic squares, loose-laid and unglued, so they cope with a dusty, patched or slightly damp slab. What they cover and what they will not cure.
How to lay interlocking garage floor tiles
Let them warm up, square the first line to the door and not a crooked wall, dry-lay a row each way, leave the expansion gap, and cut the edge row last.
How to prepare a garage floor before tiles go down
Loose-laid tiles tolerate dust, stains, old paint and hairline cracks, so most slabs need a sweep and a degrease. What they will not hide: a hump or a hollow.
Show all 9 guidesShow fewer
Damp concrete garage floor: why it happens and what you can honestly put on it
Many British slabs have no membrane, so ground moisture rises all year. The polythene test proves it, and it is why epoxy peels while loose tiles survive.
How thick should garage floor tiles be?
A tile takes a car by material and rib structure, not millimetres: rigid polypropylene parks a car where foam cannot. What it does change: the door step.
Garage floor tile patterns and layouts that work in a real garage
Two colours are practical first: the eye follows the grid, not the walls, so an out-of-square garage reads as deliberate. Checkerboard, border or bay outline.
How to clean a garage floor, bare concrete or tiles
Sweep first. Absorbent before degreaser on oil, rinse winter salt rather than spreading it, and no pressure washer on tiles: it forces water through the joints.
Cold garage floor: what actually helps and what only feels like it does
The slab sits at ground temperature and pulls heat from your feet. Tiles and mats change what is underfoot, but real insulation means board under a new deck.
Garage floor drainage: where the water from a wet car should go
Most slabs fall to the door; keep that path open, and check a threshold seal does not trap water inside. Perforated tiles pass it, solid ones hold it on top.
Projects
Turning the garage into a gym, a bar, a workshop or a bike store — and still fitting the car in.
Converting a garage into a gym in the UK
A cold slab and a bar overhead are what catch people out. Damp and the floor first, rubber under anything you drop, then everything but the rack up the wall.
Turning a garage into a bar: what to check before you spend
A room people sit in is a different job from one they park in. Damp, cold and ventilation before any timber, a word with the council, and storage on the walls.
Setting up a garage workshop in the UK
Decide where the bench goes, usually the wall away from the door with the best light, then build out from it. The floor keeps only what has wheels or legs.
Show all 9 guidesShow fewer
Converting a garage into a home office
A garage office fails on cold, damp and noise, not on furniture. Test the slab, budget for insulation and proper power, and ask the council before you spend.
Setting up a garage bike store
One mount per bike, hung by the frame at a height you can lift to, pedals and bars clear of each other, and the first metre by the up-and-over door left free.
Setting up a car detailing bay in a garage
Three things a garage lacks: water you can reach, somewhere for it to go, and light that hits paint low enough to show swirls. Sort those before buying any kit.
How to clear the garage floor in a weekend
Saturday empties it onto the drive and sorts it into three piles; Sunday fixes the wall while the floor is bare. Only things with wheels or legs go back down.
How to build a tool wall in a garage
Lay every tool on the floor in front of the wall and mark before drilling. Loaded racks at chest height first, spanners at eye level, pegboard for what moves.
A two-car garage that still fits two cars
Park both, open every door to its first stop, mark the floor. Anything inside the marks goes above bonnet height; the end wall takes the deep storage.
The man cave
Dartboards, lighting, a bar corner and what to put on the walls.
How to set up a dartboard in a garage
Bull at 1.73m, oche at 2.37m, and the 2.93m diagonal that checks both. In a garage: which wall, run-off behind the line, and protecting the wall around it.
Electronic vs bristle dartboard: which one for a garage?
Electronic if the garage is a social room: it scores for you, quieter, safer with children. Bristle if you play seriously and accept the wall takes a beating.
Lighting a garage man cave: layers, not one big light
One bright ceiling fitting is what makes it feel like a garage. Colour-accurate task light over the bench, warm low light for the rest, each on its own switch.
Show all 8 guidesShow fewer
A garage man cave on a budget: what to spend on first
Clear it, stop the draughts and damp, sort the floor, then the lighting. Those four change the room more than furniture and cost less. Sofa and bar last.
Garage bar corner ideas that work in a real garage
Furthest corner from the door, not on a shared wall, near a socket. One run of counter and a back shelf, its own light, and the fridge question sorted first.
Wall decor for a garage: one feature wall, the rest working
Cold flat walls need scale and texture: a few large pieces with depth beat many small prints. One wall done, the rest working, materials that shrug off damp.
Soundproofing a garage man cave: what actually works
Foam panels kill the echo for you but do nothing for the neighbour. Real soundproofing is mass and decoupling, a building job. Echo for you, leaks for them.
Garage man cave layout ideas for a UK single or double
The first metre inside an up-and-over door belongs to the door: social end at the far wall, work down one side, storage up high. Decide early if the car stays.
Sizes and measurements
How much space you have, how much you need, and how to measure it properly — because there is no standard British garage.
UK single garage dimensions: how to measure what yours will actually take
No official UK single garage size exists, and many older ones cannot take a modern car with a door open. Measure clear width, subtract the car, store the rest.
UK double garage dimensions: two cars, or one car and a workshop
No standard double garage size exists; width hangs on a pier between two doors or one wide door. Measure each bay, then choose: two cars, or one and a room.
How many floor tiles do I need for a garage?
Dividing area by tile size undercounts the cuts. Divide width and length by the tile, round each up, multiply, add spares. The tile size comes off the listing.
Show all 9 guidesShow fewer
Garage shelf depth: how deep should garage shelves be?
There is no standard depth. Park the car, open its door, measure wall to door edge, take off a walkway: the rest is shelf. Why shallow keeps things visible.
How high to mount garage shelving
Your reach, the car, the open door and the damp floor set the heights, not a chart. Top shelf where you can lift a loaded crate; daily kit eye to waist.
How much weight can a garage wall hold?
No web page can tell you, and this one will not pretend. Wall, fixing and whether the load hangs or levers decide it. Fit one test fixing and load it slowly.
Garage ceiling height in the UK: what eats it, and how to measure what is usable
There is no standard, and the ceiling is not the number that matters. The open door, its track, the joists and the car roof all take some. Measure under each.
Bike storage clearance: how much wall space does a bike need in a garage?
Measure the bike, not a chart: its length, its height plus the lift, and the wider of bars or pedals off the wall. A rotating mount turns depth into bar width.
How much space do you need for a workbench in a garage?
Bench depth, plus standing room, plus whatever the car door needs to open past both. No chart gives that figure; measure wall to open car door at bench height.
The shop is not open yet
Reading up first is the right order. When you are ready to buy, the checkout is the one part that is not live — leave your email and you will be in before the doors open to everyone else.
No payment is taken and nothing is reserved. It is a heads-up list, not a pre-order.
By signing up you agree to our privacy policy.